Load the paper into the input tray and touch OK on the Control Panel. Lift the scanner lid and put the paper with the print side down on the scanner glass. Close the top and select OK to check the page. The alignment page gets printed and in the event that it doesn't, then the client needs to reinstall and realign the ink cartridges appropriately
According to the kind of reports and printers, we need to change the printer’s work and settings.
1. Use the printer's control board to change the settings.
2. Print reports and to get information about the printer.
3. You can change the controls of the printer through your computer by using printer software when your printer is connected with your computer.
Touch and slide over the control board display screen, and select the symbol as indicated by your need.
After selecting the symbol, go through the available settings and afterward tap the setting that you might want to change.
Now, take after the on-screen prompts on the home screen to change the required settings.
After finishing the procedure, touch the Home symbol to return to the Home screen.
If you need to change print reports or printer settings, pick one of the available options showed on the Setup menu screen.
Tap on the Setup choice on the printer control board's display screen.
Scroll through the different screens.
Now, select the option required, from the printer's home screen.
1. Collect the Network name and security password at the time of installation.
2. Make sure a computer is connected with the wireless network.
3. Have an active internet connection (ideally broadband) and a USB cable.
NOTE:
1. Ensure there is no USB link connected during the installation process.
2. Your printer, router and your computer must be switched on and must be connected with a similar wireless system that you need to connect the printer to.
3. If you have already installed the software for a USB connection and need to change to a wireless network connection, then take after the steps below.
1. Search or open the HP folder in the software programs that are introduced. Presently, tap the organizer bearing your PC's name and tap on the name of your printer. The HP Printer Assistant programming opens up.
2. Tap on Utilities and after that snap Printer Setup & Software Selection.
3. From the options showed, click Convert a USB connected printer to wireless or Connect another printer.
4. Take after the guidelines that are shown on the screen to finish the establishment process.
5. Download the most recent and updated drivers and software for 123 HP Setup Officejet Pro 6973.
6. To setup your printer, click here http://123.hp.com/Officejet Pro6973.
1. From the official HP site HP Officejet Pro 6973 software can be downloaded.
2. Download the driver, Click on Open/Run/Save from the dialogue box.
3. Take after the on screen guidelines to set up the process.
4. In specific printers, you can just empower wireless (Wi-Fi) connectivity.
5. In general alongside the printer, a software CD will be given through which the clients can install the HP software driver and extra software.
6. If there is a need for the latest updates then you can download the product from the website. Click here http://123.hp.com/Officejet Pro6973.
1. Load the original document, print side down, into the ADF or, place it on the right front corner of the scanner glass.
2. Select SCAN and select Computer.
3. Select Document Type, to choose the type of report you need to save.
4. Select Start Scan.
1. Open HP Utility
2. Pick Scan to Computer under Scan settings
3. Select Enable Scan to Computer
1. For the most part, the scan to computer is enabled by default.
2. If the option is impaired, then take after the steps to enable it.
1. Load the original document, print side down, into the ADF or, place it on the right front corner of the scanner glass.
2. Insert the memory card and select SCAN. Select Memory Device.
3. Select Document Type to choose the type of document you need to save.
4. Select Start Scan.
Automatically send scanned photos and records to at least one email addresses specifically from the printer control panel.
1. Get ready for the scan job
a. Ensure that the printer is switched on and connected with your nearby wireless system with an active Internet connection.
b. Select the Wireless symbol on the printer control board to check the connection status.
c. Select the Web Services symbol to affirm that Web Services is activated on your printer.
a. On the printer control board, select the Scan symbol and afterward select Email.
b. On the welcome screen, select Continue.
c. Select inside the Email: box, type in your email address, and after that select Done.
d. Select Continue.
e. A PIN is sent to the email address you entered. Select Continue.
Select PIN, enter the PIN you got in your email, and afterward select Done.
f. Select Store Email or Auto-login, depending upon how you need the printer to store your login information.
a. You can filter from the scanner glass or from the Automatic Document Feeder (ADF) tray.
a. Choose your type of scan and enter the email deliver you need to send the scan to.
b. On the printer control board, select the Scan symbol and afterward select Email.
c. On the control board display, select the document that you need to use, and after that select Continue.
d. Select the name of the email profile that you made, enter the password if incited, and afterward scan the item. Click here http://123.hp.com/Officejet Pro6973.
a. On the printer control board, select the Scan symbol and after that select Email.
b. On the control board display, select the record that you need to change, and afterward select Modify.
c. Select what you need to alter, and afterward take after the on screen prompts.
undefined
screen prompts.
Sample Text
undefined
Sample Text
undefined
Sample Text
undefined
Sample Text
undefined
Sample Text
undefined
Sample Text
Sample Text